# Anthias not starting asset **URL:** \ **Category:** Anthias\ **Created:** [November 28, 2023, 9:18am UTC](https://forums.screenly.io/t/anthias-not-starting-asset/1245 "2023-11-28T09:18:40Z")\ **Posts on this page:** 1\ **Showing post:** 11
**Author:** ![nicomiguelino](https://avatars.discourse-cdn.com/v4/letter/n/e56c9b/32.png) [@nicomiguelino](https://forums.screenly.io/u/nicomiguelino)\ **Post date:** [August 26, 2024, 4:06pm UTC](https://forums.screenly.io/t/anthias-not-starting-asset/1245/11 "2024-08-26T16:06:49Z")
This issue is already fixed, as confirmed in the following discussion (in a separate topic): > [@After booting the Pi, if the asset set is a single image, it doesn't display, the screen remains dark with only the small purple screenly logo in the center](https://forums.screenly.io/t/after-booting-the-pi-if-the-asset-set-is-a-single-image-it-doesnt-display-the-screen-remains-dark-with-only-the-small-purple-screenly-logo-in-the-center/1166/28): > > We have been struggling with this over the past week or so with new builds on Pi 3 B+ and Pi 4 B units. To install we use Raspbian Lite, run updates and raspi-config, and run the Anthias install shell script. Once configured and loaded with a single asset I was able to follow the process and see that it would get to the loading of the STANDBY\_SCREEN, trigger the main loop, and trigger the asset (the asset is a web page if that is relevant), but that asset would not be displayed. If there was … > [@After booting the Pi, if the asset set is a single image, it doesn't display, the screen remains dark with only the small purple screenly logo in the center](https://forums.screenly.io/t/after-booting-the-pi-if-the-asset-set-is-a-single-image-it-doesnt-display-the-screen-remains-dark-with-only-the-small-purple-screenly-logo-in-the-center/1166/31): > > Tested this morning and everything is working as expected. Thanks for the quick turnaround! --- _[View the full topic](https://forums.screenly.io/t/anthias-not-starting-asset/1245)._