# Ctrl+alt+f1 doesn't works on Anthias **URL:** \ **Category:** Anthias\ **Created:** [December 15, 2022, 12:32pm UTC](https://forums.screenly.io/t/ctrl-alt-f1-doesnt-works-on-anthias/927 "2022-12-15T12:32:52Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![caimano](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/caimano/32/276_2.png) [@caimano](https://forums.screenly.io/u/caimano)\ **Post date:** [December 15, 2022, 12:32pm UTC](https://forums.screenly.io/t/ctrl-alt-f1-doesnt-works-on-anthias/927/1 "2022-12-15T12:32:52Z")
Hi, i have upoload image file for my raspberry pi3 b+ with balena and the device start and works fine, but if i try to enter in terminal mode for change IP address by press ctr+alt+f1 nothing happens. I use a normal usb keyboard. I would really appreciate a little help. Regards. ---
**Author:** ![ealmonte32](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/ealmonte32/32/228_2.png) [@ealmonte32](https://forums.screenly.io/u/ealmonte32)\ **Post date:** [December 16, 2022, 1:19am UTC](https://forums.screenly.io/t/ctrl-alt-f1-doesnt-works-on-anthias/927/2 "2022-12-16T01:19:59Z")
balenaOS is not Raspbian OS so control+alt+f1 is probably not a thing… I am not 100% but I dont remember this being capable since it uses BusyBox (or Yocto?) not RaspiOS. ---
**Author:** ![caimano](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/caimano/32/276_2.png) [@caimano](https://forums.screenly.io/u/caimano)\ **Post date:** [December 16, 2022, 2:02pm UTC](https://forums.screenly.io/t/ctrl-alt-f1-doesnt-works-on-anthias/927/3 "2022-12-16T14:02:45Z")
Hi, i have downloaded new Raspberry Pi Imager, then i have installed Anthias on my micro SD card with the Raspberry Pi imager choosing “other specific purpuse” then Anthias. Result: ctrl+alt+f1 doesn’t work… Any idea ? ---
**Author:** ![ealmonte32](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/ealmonte32/32/228_2.png) [@ealmonte32](https://forums.screenly.io/u/ealmonte32)\ **Post date:** [December 16, 2022, 2:54pm UTC](https://forums.screenly.io/t/ctrl-alt-f1-doesnt-works-on-anthias/927/4 "2022-12-16T14:54:04Z")
I dont use raspberry pi imager sorry, I use [balenaEtcher](https://www.balena.io/etcher/). I dont know why the way you are doing it with pi imager and selecting anthias doesnt work, I can only help if you use the custom option and flash the card with the raspbian bullseye lite 64bit one, i havent been testing the pi imager with anthias option to know what’s wrong. ---
**Author:** ![caimano](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/caimano/32/276_2.png) [@caimano](https://forums.screenly.io/u/caimano)\ **Post date:** [December 16, 2022, 2:59pm UTC](https://forums.screenly.io/t/ctrl-alt-f1-doesnt-works-on-anthias/927/5 "2022-12-16T14:59:04Z")
Ok, i’m going to try Raspbian Bullseye lite 64bit with Raspberry Pi Imager v.1.7.3 I too have always used balenaEtcher and the screenly ose image file taken from gifhub until today. ---
**Author:** ![caimano](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/caimano/32/276_2.png) [@caimano](https://forums.screenly.io/u/caimano)\ **Post date:** [December 16, 2022, 4:00pm UTC](https://forums.screenly.io/t/ctrl-alt-f1-doesnt-works-on-anthias/927/6 "2022-12-16T16:00:43Z")
It works! Thank you. But this means that i can’t use balena etcher to upload Anthian’s image on my sd card? ---
**Author:** ![ealmonte32](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/ealmonte32/32/228_2.png) [@ealmonte32](https://forums.screenly.io/u/ealmonte32)\ **Post date:** [December 19, 2022, 5:05pm UTC](https://forums.screenly.io/t/ctrl-alt-f1-doesnt-works-on-anthias/927/7 "2022-12-19T17:05:30Z")
What we did was manually install anthias/screenly-ose, the images provided on the github page might not be up to date and i normally dont test those so just to help you get up and running i just did the manual install since i know that works…