# Installed image, get a 505 error. Now what? **URL:** \ **Category:** Anthias\ **Created:** [January 29, 2025, 4:17am UTC](https://forums.screenly.io/t/installed-image-get-a-505-error-now-what/1781 "2025-01-29T04:17:01Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![dougbot01](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/dougbot01/32/540_2.png) [@dougbot01](https://forums.screenly.io/u/dougbot01)\ **Post date:** [January 29, 2025, 4:17am UTC](https://forums.screenly.io/t/installed-image-get-a-505-error-now-what/1781/1 "2025-01-29T04:17:01Z")
Hi, I installed v0.19.4 on a Raspberry Pi 5, using the section “Using the images from the releases” in installation-options.md. I downloaded the .zip, unzipped it, and used Balena Etcher to image it to a microSD card. I put this in my Pi, connected HDMI monitor, mouse, and keyboard, and booted it up. I see an “Anthias by Screenly” yellow logo on purple background. Then it flickers a bit from the boot, and then a grayscale logo. Then it eventually ends up a light gray background with “Server Error 505”. I am confused, as there is no documentation on what to do AFTER the installation. Am I supposed to press a special key to configure WiFi on boot? Can I SSH into it with some username/password that I wasn’t told about? Is there a way to get to a terminal with Ctrl-Atl-F2 or something? I tried several things, but I have had no success, and there is no direction on what SHOULD happen after install. Do I have to have it on ethernet the first time to get anywhere? I am guessing the problem is no network, but it would be great if “next steps” were documented. I am happy to make a pull request with documentation improvements, if people can give me guidance on what how to get things working. I am going to try the Raspberry Pi OS Lite (Bookworm) installation method next, I guess. I do not need finely tuned installation, but I would like it to actually function. BalenaOS is probably not an option for my use case. Thank you for any advice! ---
**Author:** ![nicomiguelino](https://avatars.discourse-cdn.com/v4/letter/n/e56c9b/32.png) [@nicomiguelino](https://forums.screenly.io/u/nicomiguelino)\ **Post date:** [January 29, 2025, 4:52pm UTC](https://forums.screenly.io/t/installed-image-get-a-505-error-now-what/1781/2 "2025-01-29T16:52:52Z")
@dougbot01, is your Raspberry Pi 5 connected via Wi-Fi or via Ethernet? ---
**Author:** ![dougbot01](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/dougbot01/32/540_2.png) [@dougbot01](https://forums.screenly.io/u/dougbot01)\ **Post date:** [January 30, 2025, 3:41am UTC](https://forums.screenly.io/t/installed-image-get-a-505-error-now-what/1781/3 "2025-01-30T03:41:32Z")
Hi and thank you for the reply. I didn’t have a wired connection or a WiFi connection. I was too far to plug into ethernet. I was assuming once the machine booted up, that there would be a way to configure the WiFi or something. But it seems it hit an error before I even had a chance to do it. I did the manual install instead and was able to configure that with WiFi from the start, but not sure how I would be able to do that from the downloadable image? I guess upon reading more at this page [https://github.com/Screenly/Anthias/blob/master/docs/wifi-setup.md](https://github.com/Screenly/Anthias/blob/master/docs/wifi-setup.md) it sounds like I must have to boot with it wired the first time. Is that the expectation? If so, perhaps I will suggest some edits to the docs with a pull request. Thank you! ---
**Author:** ![nicomiguelino](https://avatars.discourse-cdn.com/v4/letter/n/e56c9b/32.png) [@nicomiguelino](https://forums.screenly.io/u/nicomiguelino)\ **Post date:** [January 30, 2025, 2:46pm UTC](https://forums.screenly.io/t/installed-image-get-a-505-error-now-what/1781/4 "2025-01-30T14:46:08Z")
@dougbot01, the Wi-Fi setup is not operational at the moment. In the meantime, you can set it up via a wired connection.