# Issues with Setup on Rasp Pi4B

**URL:** <https://forums.screenly.io/t/issues-with-setup-on-rasp-pi4b/804>\
**Category:** Anthias\
**Created:** [June 1, 2022, 3:51pm UTC](https://forums.screenly.io/t/issues-with-setup-on-rasp-pi4b/804 "2022-06-01T15:51:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mr\_Creech](https://avatars.discourse-cdn.com/v4/letter/m/22d042/32.png) [@Mr\_Creech](https://forums.screenly.io/u/Mr_Creech)\
**Post date:** [June 1, 2022, 3:51pm UTC](https://forums.screenly.io/t/issues-with-setup-on-rasp-pi4b/804/1 "2022-06-01T15:51:13Z")

</div>

Hi,

I have 2GB Pi 4 Model B devices I am trying to get Screenly setup on but having problems. All the resources I’ve seen on how to install it have not been good for me.

Here’s what I’m doing:

1. Load OS to SD card (128GB; I know, it’s overkill)
2. Load up OS
3. Create an admin profile
4. Make sure date/time correct
5. Make sure OS up to date
6. Run Terminal: $ bash \<(curl -sL [https://www.screenly.io/install-ose.sh](https://www.screenly.io/install-ose.sh))
7. Screenly install loads; Press Y, 1, Y, N, Reboot – No notable errors
8. Comes right back to desktop for some reason!?!

I have tried CLI and Desktop versions of Bullseye and Buster Legacy but without success. I’ve done this successfully before but it’s been a couple years. What am I missing?? I feel it should be something simple… Thanks in advance!!

---

<div class="post-metadata">

**Author:** ![natwdi](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@natwdi](https://forums.screenly.io/u/natwdi)\
**Post date:** [June 1, 2022, 7:43pm UTC](https://forums.screenly.io/t/issues-with-setup-on-rasp-pi4b/804/2 "2022-06-01T19:43:18Z")

</div>

I’m having the exact same issue! This is my first experience using a Raspberry Pi. Like you, I’ve tried installing Raspian Buster and Bullseye variants. I also tried developer and the standard version of Screenly. Nothing seems to work! Following this thread…

---

<div class="post-metadata">

**Author:** ![vpetersson](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/vpetersson/32/8_2.png) [@vpetersson](https://forums.screenly.io/u/vpetersson)\
**Post date:** [June 9, 2026, 8:20am UTC](https://forums.screenly.io/t/issues-with-setup-on-rasp-pi4b/804/3 "2026-06-09T08:20:57Z")

</div>

Sorry the setup was rough. Installing is much simpler now: Anthias is available directly in the Raspberry Pi Imager, so you choose Anthias from the operating system list and write it to your SD card, with no separate steps. Marking this as solved. If you hit a snag with the current method on your Pi 4, please open a fresh topic and we will walk you through it.