# Moving back and forth through WiFi **URL:** \ **Category:** Anthias\ **Created:** [April 12, 2019, 1:15am UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64 "2019-04-12T01:15:31Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![CoreyV](https://avatars.discourse-cdn.com/v4/letter/c/b4bc9f/32.png) [@CoreyV](https://forums.screenly.io/u/CoreyV)\ **Post date:** [April 12, 2019, 1:15am UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64/1 "2019-04-12T01:15:31Z")
I am using Screenly ose for a school project and have to move back and forth regularly. What would be the easiest way to switch through multiple wifi networks from another computer as the raspberry pi I’m using is hard to reach. Thanks ---
**Author:** ![CoreyV](https://avatars.discourse-cdn.com/v4/letter/c/b4bc9f/32.png) [@CoreyV](https://forums.screenly.io/u/CoreyV)\ **Post date:** [April 12, 2019, 2:28am UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64/2 "2019-04-12T02:28:43Z")
Based on what I’ve found so far I need to delete some file so the raspberry will create the hot spot for me to connect to. Can I access and delete this file with putty from my laptop and if so what is the name of the file I need to remove ---
**Author:** ![ealmonte32](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/ealmonte32/32/228_2.png) [@ealmonte32](https://forums.screenly.io/u/ealmonte32)\ **Post date:** [April 12, 2019, 5:53am UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64/3 "2019-04-12T05:53:45Z")
Quick question, if you know the access points of the wireless networks you are moving around to why dont you just set all these up via `sudo raspi-config` -network options -Wi-Fi so that it creates network profiles for wpa\_supplicant and will connect to them when scanning… ---
**Author:** ![CoreyV](https://avatars.discourse-cdn.com/v4/letter/c/b4bc9f/32.png) [@CoreyV](https://forums.screenly.io/u/CoreyV)\ **Post date:** [April 12, 2019, 10:30am UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64/4 "2019-04-12T10:30:13Z")
I would do that but I do not know all the WiFi networks I will be using. ---
**Author:** ![CoreyV](https://avatars.discourse-cdn.com/v4/letter/c/b4bc9f/32.png) [@CoreyV](https://forums.screenly.io/u/CoreyV)\ **Post date:** [April 12, 2019, 6:43pm UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64/5 "2019-04-12T18:43:41Z")
I’ve been looking around and I saw something about deleting the .screenly/initialized. file so I ran rm .screenly/initialized. It didn’t work. So am I running the command wrong or do I need to try something else. Also does anyone know if this way would work over putty ---
**Author:** ![ealmonte32](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/ealmonte32/32/228_2.png) [@ealmonte32](https://forums.screenly.io/u/ealmonte32)\ **Post date:** [April 13, 2019, 10:29pm UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64/6 "2019-04-13T22:29:22Z")
I am going to try this today, using the screenly image [(this-one)](https://github.com/Screenly/screenly-ose/releases/download/0.16/image_2018-11-23-Screenly-OSE-lite.zip) flashed onto the SD card, putting the ssh empty file in /boot/ so that I can ssh into the device when it starts after it allows the initial wifi setup. Then after setting it up with a SSID and putting some test assets/URLs, I am going to change the hotspot name but before I do or before I turn off the device, I will click on the Re-run network detection button and then reboot it. Any of these steps above you did not do or did you do exactly as I mention? ---
**Author:** ![CoreyV](https://avatars.discourse-cdn.com/v4/letter/c/b4bc9f/32.png) [@CoreyV](https://forums.screenly.io/u/CoreyV)\ **Post date:** [April 13, 2019, 11:36pm UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64/7 "2019-04-13T23:36:24Z")
Yeah I found that about a hour ago I don’t know how I missed it. It works perfectly for what I want. Thanks ---
**Author:** ![vpetersson-bot](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/vpetersson-bot/32/803_2.png) [@vpetersson-bot](https://forums.screenly.io/u/vpetersson-bot)\ **Post date:** [October 22, 2026, 1:48pm UTC](https://forums.screenly.io/t/moving-back-and-forth-through-wifi/64/8 "2026-10-22T13:48:14Z")
Hi all, a quick update for anyone landing on this thread: we’ve brought back WiFi setup via a captive portal in Anthias, in [PR #3399](https://github.com/Screenly/Anthias/pull/3399). When a screen has no working network, it raises its own access point and shows the network name and passphrase on screen. You join it from your phone or laptop and pick the WiFi network to connect to. No SSH, keyboard, or `nmcli` needed. It’s merged into `master` and we’re **calling for testers**. If no issues turn up, it’ll ship in the next release, but we’d really appreciate the community’s help putting it through its paces first. The easiest way to try it is with the installer script, choosing the `latest` option (installs from `master`). Please report how it went (Pi model, OS, wired or WiFi, anything odd) here or on the PR. For the more technically curious: the old integration was built on balena’s wifi-connect, which had quietly stopped working for us (among other things, no ARMv6 binary since v4.4.6). So we wrote our own implementation from scratch in Rust as a replacement: [Screenly-Labs/wifi-connect](https://github.com/Screenly-Labs/wifi-connect). It talks to NetworkManager directly, works out on its own whether a screen actually needs setup (so wired or already-connected screens are left alone), and backs off on sites where there’s nothing to join. Bug reports and PRs on that repo are very welcome too.