# Webinterface Not Work

**URL:** <https://forums.screenly.io/t/webinterface-not-work/316>\
**Category:** Anthias\
**Created:** [April 29, 2020, 1:47pm UTC](https://forums.screenly.io/t/webinterface-not-work/316 "2020-04-29T13:47:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jannik2020](https://avatars.discourse-cdn.com/v4/letter/j/7c8e57/32.png) [@Jannik2020](https://forums.screenly.io/u/Jannik2020)\
**Post date:** [April 29, 2020, 1:47pm UTC](https://forums.screenly.io/t/webinterface-not-work/316/1 "2020-04-29T13:47:25Z")

</div>

I have installed screenly like this and i cant connect to the configuration Page

Installing on Raspbian

The tl;dr for installing Screenly OSE on Raspbian Lite is:

$ bash \<(curl -sL [https://www.screenly.io/install-ose.sh](https://www.screenly.io/install-ose.sh))

This installation will take 15 minutes to several hours, depending on variables such as:

The Raspberry Pi hardware version  
The SD card  
The internet connection

During ideal conditions (Raspberry Pi 3 Model B+, class 10 SD card and fast internet connection), the installation normally takes 15-30 minutes. On a Raspberry Pi Zero or Raspberry Pi Model B with a class 4 SD card, the installation will take hours. As such, it is usually a lot faster to use the provided disk images.

---

<div class="post-metadata">

**Author:** ![ealmonte32](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.screenly.io/ealmonte32/32/228_2.png) [@ealmonte32](https://forums.screenly.io/u/ealmonte32)\
**Post date:** [July 13, 2020, 3:29am UTC](https://forums.screenly.io/t/webinterface-not-work/316/2 "2020-07-13T03:29:13Z")

</div>

a bit more details would help… how are you trying to connect to the config page? does the installation complete properly, what does the screen show when screenly boots up?